1、 FX2N -FX2N-8AD 用戶 手冊
Guidelines for the Safety of the User and Protection of the FX2N-8AD Analog input block. This manual provides information for the use of the FX2N-8AD Analog input block. The manual has been
Guidelines for the Safety of the User and Protection of the FX2N-8AD Analog input block. This manual provides information for the use of the FX2N-8AD Analog input block. The manual has been
2、 FX2N -FX2N-5A 用戶 手冊
Foreword • This manual contains text, diagrams and explanations which will guide the reader in the correct installation and operation of the FX2N-5A Special function block. It should be
Foreword • This manual contains text, diagrams and explanations which will guide the reader in the correct installation and operation of the FX2N-5A Special function block. It should be
3、 FX2N -FX2N-4DA 用戶指南
CONNECTION WITH PLC e FX2N-4DA unit can be connected to the PLCs as follows. Restrictions apply to the maximum number connectable units, depending on the DC24V/DC5V Power Supply capacities and
CONNECTION WITH PLC e FX2N-4DA unit can be connected to the PLCs as follows. Restrictions apply to the maximum number connectable units, depending on the DC24V/DC5V Power Supply capacities and
4、 FX2N -FX2N-4AD-TC 用戶指南
3. CONNECTION WITH PLC 3.1 Connection with PLC The FX2N-4AD-TC unit can be connected to the PLCs as follows. Restrictions apply to the maximum number of connectable units, depending on the DC24
3. CONNECTION WITH PLC 3.1 Connection with PLC The FX2N-4AD-TC unit can be connected to the PLCs as follows. Restrictions apply to the maximum number of connectable units, depending on the DC24
5、 FX2N -FX2N-4AD-PT 用戶指南
3.1 Connection with PLC The FX2N-4AD-PT unit can be connected to the PLCs as follows. Restrictions apply to the maximum number of connectable units, depending on the DC24V/DC5V Power Supply cap
3.1 Connection with PLC The FX2N-4AD-PT unit can be connected to the PLCs as follows. Restrictions apply to the maximum number of connectable units, depending on the DC24V/DC5V Power Supply cap
6、 FX2N -FX2N-4AD 用戶指南
*1 Up to 7 units can be connected to an FX3UC-32MT-LT PLC. 5. SPECIFICATIONS 5.1 General specification 5.2 Performance specification and others Item Specification General specifications Same
*1 Up to 7 units can be connected to an FX3UC-32MT-LT PLC. 5. SPECIFICATIONS 5.1 General specification 5.2 Performance specification and others Item Specification General specifications Same
7、 FX2N -FX2N-2LC 用戶指南
such cases. • When a failure occurs in a relay, transistor, triac, etc. in the FX2N-2LC or output unit of PLC, outputs may keep ON or OFF. For output signals which may lead to severe acc
such cases. • When a failure occurs in a relay, transistor, triac, etc. in the FX2N-2LC or output unit of PLC, outputs may keep ON or OFF. For output signals which may lead to severe acc
8、 FX2N -FX2N-2LC 用戶 手冊
Foreword • This manual contains text, diagrams and explanations which will guide the reader in the cor- rect installation and operation of the communication facilities of FX series. &#
Foreword • This manual contains text, diagrams and explanations which will guide the reader in the cor- rect installation and operation of the communication facilities of FX series. &#
9、 FX2N -FX2N-2DA 用戶指南
6.1 Buffer memory BFM#16: The D/A conversion data of the channel specified with BFM#17 (digital value) is written. The D/A data is written in binary in order of the lower 8bit and higher 4bit
6.1 Buffer memory BFM#16: The D/A conversion data of the channel specified with BFM#17 (digital value) is written. The D/A data is written in binary in order of the lower 8bit and higher 4bit
10、 FX2N -FX2N-2AD 用戶指南
5.2 Power supply specification and others 5.3 Defining gain and offset Item Content Analog circuits 24V DC ±10% 50mA (Internal power supplied from the main unit) Digital circuits 5V DC 20mA (
5.2 Power supply specification and others 5.3 Defining gain and offset Item Content Analog circuits 24V DC ±10% 50mA (Internal power supplied from the main unit) Digital circuits 5V DC 20mA (
11、 FX2N -FX2N-2AD 用戶指南
5.2 Power supply specification and others 5.3 Defining gain and offset Item Content Analog circuits 24V DC ±10% 50mA (Internal power supplied from the main unit) Digital circuits 5V DC 20mA (
5.2 Power supply specification and others 5.3 Defining gain and offset Item Content Analog circuits 24V DC ±10% 50mA (Internal power supplied from the main unit) Digital circuits 5V DC 20mA (
12、 FX2N -FX2N-1RM-E-SET 用戶 手冊
Foreword • This manual contains text, diagrams and explanations which will guide the reader in the correct installation and operation of the Programmable Cam Switch FX2N-1RM-E-SET. It sh
Foreword • This manual contains text, diagrams and explanations which will guide the reader in the correct installation and operation of the Programmable Cam Switch FX2N-1RM-E-SET. It sh
Bulude 廣州凌控自動化科技有限公司 ◎版權所有
銷售熱線：020-28625769 傳真：020-28029239
