1、 FX2N -FX2N-1HC 用戶指南
PECIFICATIONS 3.1 General specifications Perform the dielectric withstand voltage test between the GND terminal and all the other termi- nals short-circuited. 3.2 Performance specifications
PECIFICATIONS 3.1 General specifications Perform the dielectric withstand voltage test between the GND terminal and all the other termi- nals short-circuited. 3.2 Performance specifications
2、 FX1N -FX2C-IO-CON,FX2C-I-CON-S,FX2C-IO-CON-SA 手冊.pdf
ution The pin numbers or "!" mark printed on this product does not correspond to the pin array of the connector on the connected equipment. It is necessary to perform wiring while referrin
ution The pin numbers or "!" mark printed on this product does not correspond to the pin array of the connector on the connected equipment. It is necessary to perform wiring while referrin
3、 FX1S -FX1S 硬件 手冊
Guidelines for the Safety of the User and Protection of the FX1S. This manual provides information for the use of the FX1S. The manual has been written to be used by trained and competent perso
Guidelines for the Safety of the User and Protection of the FX1S. This manual provides information for the use of the FX1S. The manual has been written to be used by trained and competent perso
4、 FX1N -FX1N-EEPROM-8L 手冊
1) Turn off the write-protect switch provided on the right side of the 8L. 2) Attach the 8L to the PLC while the PLC power is off. 3) Turn on the power of the PLC. Press the RD key of the 8L
1) Turn off the write-protect switch provided on the right side of the 8L. 2) Attach the 8L to the PLC while the PLC power is off. 3) Turn on the power of the PLC. Press the RD key of the 8L
5、 FX1N -FX1N-CNV-BD 手冊
Make sure to turn off the power before installing the FX1N
CNV-BD.
A)Connection board FX1N-CNV-BD
(function expansion board)
B)Connector for optional e
6、 FX1N -FX1N-BAT 用戶 手冊
• The module case is made of resin; do not drop it or subject it to strong shock. Doing so may damage the module. • When disposing of this product, treat it as industrial waste.
• The module case is made of resin; do not drop it or subject it to strong shock. Doing so may damage the module. • When disposing of this product, treat it as industrial waste.
7、 FX1N -FX1N-BAT 用戶 手冊
• The module case is made of resin; do not drop it or subject it to strong shock. Doing so may damage the module. • When disposing of this product, treat it as industrial waste.
• The module case is made of resin; do not drop it or subject it to strong shock. Doing so may damage the module. • When disposing of this product, treat it as industrial waste.
8、 FX1N -FX1N 硬件 手冊
FX1N SERIES PROGRAMMING CAUTION Thank you for buying The Mitsubishi FX1N series controller. Please note the following. Notes: Block Move instruction Applicable PLC: FX1N Ver 1.00-2.10 Applic
FX1N SERIES PROGRAMMING CAUTION Thank you for buying The Mitsubishi FX1N series controller. Please note the following. Notes: Block Move instruction Applicable PLC: FX1N Ver 1.00-2.10 Applic
9、 FX1N -FX1N 硬件 手冊
FX1N SERIES PROGRAMMING CAUTION Thank you for buying The Mitsubishi FX1N series controller. Please note the following. Notes: Block Move instruction Applicable PLC: FX1N Ver 1.00-2.10 Applic
FX1N SERIES PROGRAMMING CAUTION Thank you for buying The Mitsubishi FX1N series controller. Please note the following. Notes: Block Move instruction Applicable PLC: FX1N Ver 1.00-2.10 Applic
10、 FX1N -FX1N-485-BD 用戶指南
2. Installation 2.1 Installation procedure Make sure to turn off the power before installing the 485BD. A) Communication board 485BD (function expansion board) B) Connector for optional equip
2. Installation 2.1 Installation procedure Make sure to turn off the power before installing the 485BD. A) Communication board 485BD (function expansion board) B) Connector for optional equip
11、 FX1N -FX1N-232-BD 用戶指南
The RS-232C communication board FX1N-232-BD (hereafter referred to as "232BD") is connected to the FX1S/FX1N Series PLC basic unit, and available for the applications described below. 1.1 Featu
The RS-232C communication board FX1N-232-BD (hereafter referred to as "232BD") is connected to the FX1S/FX1N Series PLC basic unit, and available for the applications described below. 1.1 Featu
12、 FX1N -FX1N-8AV-BD 手冊
he analog trimmer FX1N-8AV-BD is a function xpansion board which is mounted to the FX1S/ X1N Series PLC basic unit and used as an analog mer trimmer of rotary switch. or the specifications
he analog trimmer FX1N-8AV-BD is a function xpansion board which is mounted to the FX1S/ X1N Series PLC basic unit and used as an analog mer trimmer of rotary switch. or the specifications
Bulude 廣州凌控自動化科技有限公司 ◎版權所有
銷售熱線：020-28625769 傳真：020-28029239
